This has happened to me often enough that I should have learned to read my manuals cover-to-cover, which I never do: A feature I had no use for became inadvertently activated, and sabotaged my normal operating modes.
In this case, it was the CW-in-SSB feature, which apparently deactivates the RF/SWR meter in SSB mode. It's described on page 45 of the most recent manual. --... ...-- SteveSgt, KC6ZKT On 5/28/18 21:33 PM, Grant Youngman wrote: > Key the transmitter and then adjust Mic Gain … > > Grant NQ5T > K3 #2091, KX3 #8342 > >> On May 28, 2018, at 10:19 PM, Steve Sergeant <steve...@effable.com >> <mailto:steve...@effable.com>> wrote: >> >> Brian: >> >> That's the first thing I tried. >> >> While in USB/LSB or AM, tapping the KYR-SPOT/MIC knob toggles between >> "13 WPM" and "MIC 30" on the VFO B display, but does not change the >> meter to SWR/RF. >> >> The next clue is that I do see the SWR/RF meter when in CW mode, but not >> in USB/LSB nor in AM. When I tap the KYR-SPOT/MIC knob in CW mode, the >> VFO B display shows "SPOT" and a tone is heard through the speaker. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
