I am using the KX3 with SDR play as a pan adapter. I have noticed that there is some type of signal (quite strong) showing up on the pan adapter on the frequency that the KX3 is tuned. This signal moves as I move the VFO, so it seems to be some local oscillator issue. The result is the sdr play seems to be desensitized and signal levels on the KX3 are lower. When I engage the RX pre-amp, this signal goes away and all is right with the world. On most bands 10 db is enough to do the trick. On 17 meters it takes 30 db to get rid of it and remove the desensitization from the RX. Wonder if anyone else has seen this working with an SDR play and KX3? I have the 2.9 firmware installed. Thanks...Fred, WD5F ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
