The software COULD be better.  I needed 36 MHz and 10 MHz and that wasn't "available" directly in the software, but with the right manual parameter settings, you can achieve virtually ANY combination. I believe Wes, you were the one that clued me in to this fact..... as well as the multiple parameter combination to achieve the same output freq combos.

As you said.... 10 MHz only...  easy-peasey.

Question that will save me a lot of research....  Can the Bodnar be fed to the K3s directly bu jumper without attenuation?  Just verifying.  Don't want to feed too high a signal and torch something.  :)

73,

______________________
Clay Autery, KY5G
(318) 518-1389

On 06/05/18 07:38, Wes Stewart wrote:
I'm using it for other purposes but I have one of these and it's fine.

The only downside is the very clunky software and the sometimes difficulty of getting the two frequencies out that you might want.  For 10MHz only, it's a piece of cake.

Wes  N7WS

On 6/5/2018 4:49 AM, Joe DeVincentis wrote:
I have have this one and no complaints:

https://v3.airspy.us/product/lb-gpsdo-1/

73,
Joe, KO8V

On Jun 5, 2018, at 12:08 AM, eric norris via Elecraft <[email protected]> wrote:

Dear Gang:
A shiny new K3S has joined my Elecraft herd, though K3 #2545 is still going strong.  I have been getting confused looking at GPSDOs, and wonder if someone can recommend a plug and play (or close as practicable) GPSDO for me to buy.
73 Eric WD6DBM


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to