Thanks Jim....
I think we ID'd it as SSTV near 14.230.... but you are right as usual.
Time for me to get setup for digital and at least learn what they all
look/sound like. Sounds easy enough. I'll add it to the list.
Thanks to all who replied! Question answered; thread is dead, Fred!
<smile>
73,
______________________
Clay Autery, KY5G
(318) 518-1389
On 08-Jun-18 00:03, Jim Brown wrote:
On 6/7/2018 6:16 PM, Clay Autery wrote:
Can someone send me a screen cap off a P3 or something of the
waveform for FT8 (and any other digital mode).
Hi Clay,
It's worth downloading WSJT-X, installing it, RTFM, and then start
listening. It's excellent software, well written, well documented.
And, if you RTFM, easy to use. Among other things, that will get your
ears tuned in to what those modes sound like -- just set your Mon gain
so you hear what you're TXing, and you'll know.
Hookup to K3/K3S is super easy. feed the Line In from Computer Out,
Feed Computer in from Line Out, set the K3/K3S for Digital A and VOX.
in WSJT-X, push Tune to get the computer to send a steady tone, set
Line In Gain and VOX Gain so that you go into TX, adjust Line In Gain
so that ALC flickers 4-5 bars. Adjust output from rig to Computer so
that you get indicated 30-40 dB on the WSJT-X bar graph.
Choose FT8, select the band you want to try first, and you should see
decodes every 15 seconds. Also, WSJT modes require a clock within
about 1 sec, do whatever is needed to accomplish that. I use this one.
http://www.timesynctool.com/
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
