Hi all,
I am running a barefoot K2 with various options, including the auto-tuner
and am getting ready to put up a new antenna. I've decided on a 40 meter
dipole that I will feed with 450 ohm 'window' line. This will be my only
antenna, at least for a while. I operate mostly on 40 meters (CW) but also
a bit on 20 (psk31) and 15/10 (also CW) when they are open and hope to tune
the 40 meter dipole to those bands with the auto-tuner.
I am planning to run the 'window' line all the way into the shack to the K2
(which is about 5 or ten feet from the outside wall). My question is should
I also use the BL1 at the K2 and will I have any trouble tuning to the other
bands. I guess I don't understand what 4:1 means, in this case as I'll be
using 450 ohm feedline to the K2.
Thanks in advance for your comments.
Tom
WB2QDG
K2 1103
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
