Yes Skip, I too wish the P3 settings would remain with each band and mode. In contests like the IARU HF Championship, ARRL 10m, etc. where both modes are allowed, keeping appropriate bandwidth settings and the RX bandpass locations on the P3 would be very helpful!
Yes, we can use a K-Pod or Genovation keyboard to do a lot, but I would rather keep what settings currently exist and change them only when I want to do so. I guess the first question is: is there enough memory in the P3 to do this. If so, where is something like this in the firmware improvement plan. If not, how difficult is it to upgrade the firmware memory size to accomplish this? In the meantime, I rarely run my K3 without the P3, even when I operate portable, like the upcoming Field Day. In the shack I use an SVGA monitor connected to the P3. I plan to replace it with a PIP monitor so I can switch from P3-1 to P3-2 in SO2R configuration. I often take P3 screenshots for stations with broad signals and to use in presentations. Combining the P3 with the KRX3 makes for a winning combination in many circumstances! 73, Bill, K8TE www.dukecityhamfest.org -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
