It's a simple visit to ohms law. OR Just grab a "kill a watt" tester and look at your current draw. With a quick "in the head math" the 15 amp breaker will be fine.
Remember the 30amp supply is at 13.8v not 117v ac the panel breaker is at. Again Ohms law. BTW : glad you asked the question rather than change breaker size. 73 Dean On Wed, Jun 13, 2018, 23:03 Michael Gillen via Elecraft < [email protected]> wrote: > Kind of a dumb question however here goes: > > I got my K3S a short while ago and now I want to add the KPA500 and KAT500 > to it however it just now occurred to me that I should check how much juice > I need to power that thing! > > I’m currently using an Alinco DM-330MV which I believe puts out 30A > continuous however its probably plugged into one the house 15A lines. > > So my questions are: > > 1) Will 15A house line supply enough juice for the K3S, KPA500, KAT500, > and in the future a P3 Panadaper? > > 2) If not can I get away with replacing the breaker with a 20A breaker? > 30A? > > 3) Will the Alinco be big enough or should I upgrade that as well? > > > Thanks guys, > Michael > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
