A Piglet is overkill for my needs - its needs power and is another box. At the moment my fixed station is in the roof - loft, and connects to a Raspberry Pi 3 running WSJT-X.
I can operate it all via VNC from downstairs in comfort. It also functions much as a Piglet when using Ser2Net to give a virtual serial port accessed just like Piglet. This keeps my home tidy and is friendly towards my XYL. The Bluetooth solution would be small and elegant for ACC1 - and portable for travel. Further research has now shown the IRXON Bluetooth Serial Adaptor BT578 adapter , which is moderately priced. My idea was if the HC05 can interface directly then it would give very low cost wire free solution. John N > On 19 Jun 2018, at 14:39, Yngvi (TF3Y) <t...@tf3y.net> wrote: > > Have you considered the Piglet by pignoly.net <http://pignoly.net/> ? > The Piglet provides CAT via WiFi. > > 73, Yngvi TF3Y > > On Mon, Jun 18, 2018 at 1:36 PM John Newgas <g7...@newgas.net > <mailto:g7...@newgas.net>> wrote: > I want to use my KX3 with a 12” Macbook for FT8 and other digi-modes but it > has only one USB port. > I thought it would be elegant and lightweight use a HC05 serial to bluetooth > adaptor module for the ACC1 interface to avoid cables like the KXUSB or > KXSER. > > The HC05 is designed for Arduino level 0 volt low and 3.3 volt high. > > Has anyone tried one of these directly with a KX3 ACC1 but without a MAX232 > level shifter ? Before building a small circuit board i thought it worth > asking if anyone else has already tried as I am naturally lazy type. > > John N > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com