Hi Don.
I just got back from 'experimenting'!
I turned the Reflock off and manually set the offsets according to the
figures on the Xverter top.
With the Reflock still turned off, the discrepancy is several KHz (I did not
note the exact figures).
With the Reflock turned back on, the discrepancy is back to around 200 Hz
and there's no way to manually adjust that in software.
I wonder if the K144XV itself is a tad off? I bought it from another amateur
so I don't know its 'tweak' history, other than I have never adjusted any of
it internally.
73,
Alan. G4GNX
-----Original Message-----
From: Don Wilhelm
Sent: Friday, June 22, 2018 7:46 PM
To: G4GNX ; Elecraft Reflector
Subject: Re: [Elecraft] Transverter calibration
Alan,
I have not worked with the REFLOCK, but I believe the XV1 OFS parameter
must still be set in the menu. The REFLOCK cannot read the labels on
the top of the K144XV.
73,
Don W3FPR
On 6/22/2018 2:02 PM, G4GNX wrote:
Hi Don.
I am aware of the manual method of configuring the offsets and I
originally used that before I installed the K144XV Ref lock option. The
Ref lock option manual infers that all offset calculation is automatic
when the menu is set to REFLOCK and user calibration can't be undertaken.
Is this not the case?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
