I have been using the SignaLink external sound card with my K3S for FT8. I am running Windows 10 and controlling the radio and PTT with Ham Radio Deluxe. It worked well that way. However, a couple of days ago there was a thread on using the internal sound card, and I decided to try it.
I have the single USB cable hooked between the radio and the computer. Is that the only connection required? I have the computer and WSJT-X set to USB CODEX both input and output. Decoding and the PTT are working. When I click tune or Enable transmit to send CQ, the rig goes into transmit, and the ALC indicates signal out. However, a second later the transmission ceases. I had already discovered the microphone privacy setting issue and fixed that problem. Any suggestions on what I might be doing wrong? Lee, KV5M ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
