Ken,
While your trouble shooting the audio problem, go ahead and order a couple
of headphone jacks from Elecraft. If the jack is not the problem it won't
hurt to have a spare on hand. I've had to replace the jack twice in one of
my K2's. It didn't make sense to me either, one day it worked, the next day
it didn't. If there is a weak point in the K2/K1 audio hardware, it's the
phone jack.
John
K7UP
@ K2's and a K1
At 07:07 AM 16/05/06, you wrote:
Ok---this might be elementary to many but I can't seem to find the problem.
After I built the NB board and plugged it in along with the SSB board and
plugged in the ATU cable and the internal battery cable, I plugged in the
speaker cable, Now there is no audio from the speaker, but there is audio
from the
headphones. I checked the speaker and cable with a ohmmeter and things look
ok. Elecraft suggusted that the headphone jack might be bad, but I had never
used it before this and the audio was ok from the speaker
then. Everything else
is working fine including the NB Has anyone else experienced this
problem? I
might add that I did not build this K2 but aquired it total built and working
100%
Any help would be appreciated.
Ken K1DWZ
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
