Is this some sort of a spoof? You can't be serious. Putting beautiful equipment like this into the weather(not quite, but almost) is poor engineering practice at least and at most, a felony. If you insist on doing this, sell your Elecraft stuff and buy one of the other three imported brands, but don't expect to get any repair service when it breaks from environmental abuse.
End of soapbox rant, for now. Dave, K4TO On Wed, Jul 4, 2018 at 11:42 AM [email protected] <[email protected]> wrote: > I’m at the point now in my household move where I should like to put my > K-Line (K3/KPA1500) out in a shed about 200’ from the house and operate it > remotely via an local ethernet connection. This week I’ve been sweltering > in the humid heat here in the NE and that prompts the question: What makes > since in the way of keep the equipment happy across wide temperature and > humidity changes? Winters possibly down below freezing, but dry, and > summers up to 100F and humid. Today’s temp is clearing 88 with a dew point > of 76, for example. > > What do you all do, short of supplying heaters and/or air conditioners? > If I could avoid that, I would like to. The good news is that > environmental changes are gradual. The spec page for the KPA1500 does not > seem to mention environmental specs. > > Thanks for any info. > > Gary W2CS > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
