Two tuners.......wow, lucky to have any RF into the antenna.
My K3S and its internal ATU will tune the 160M inverted V{256 ft} with
balanced feedline quite easily. The SWR on the 18" of coax between the
1:1 current balun and the radio is 1.75:1. The drawback to the 160M
antenna.......it is very difficult to rotate. The antenna works quite
well on 160M - 6M. However nothing to compare with my 4 element 6M yagi.
73
Bob ,K4TAX
On 7/7/2018 7:30 PM, Brian Hunt wrote:
Just worked N4SL (DN28) in MT on 50.145 SSB with my K3 @ 100w and a inverted V
doublet - through 2 tuners, no less. Heard quite a few others but they have
faded. First time on 6m Es. Great fun!
73,
Brian, K0DTJ
Half Moon Bay, CA
CM87
I was just hearing someone on 50.145, not solid but some words. Then he signed
and seems dead now.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
