Been trying to figure out why every once in a while “Ext. Mic” will display on the screen when transmitting. I’m working with Elecraft on it currently.
My question is; does anyone notice when you have the radio set to 10 Watts the RF meter only shows on bar? When I set the radio below 9.8 watts the meter always works fine. I can adjust the mic gain up and down while set at 10 watts and the RF meter will start moving again. Even when I put it back on the mic gain setting that it wasn’t working on. But when I turn the radio off and back on the RF meter doesn’t move unless I’m under 9.8 Watts? Even if I get the RF meter to start moving again when I adjust the mic control, if I wait a little while it will stop moving. It does it with the internal mic as well. And just to be clear, this is happening when I push PTT and talk into mic. Anyone have any idea on this? If you could check your radio I would appreciate it. Thank you!!! -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
