You have to use the AUX connector and a custom cable.... Did you watch
the video link I gave you?
That video describes how to make the cable.... and/or you can also
figure it out from reading the SPE and K3s manuals...
OR you can call Dan Tassell at Exper Linears (SPE Distro in US) and ask
him to make you one... http://expertlinears.com/contact.html
73,
______________________
Clay Autery, KY5G
(318) 518-1389
On 20-Jul-18 22:43, Barry Simpson wrote:
Thank you to all those of you who replied to my earlier query regarding
band data information.
I am now also looking for a way to provide a CAT interface to the SPE
amplifier without using a separate computer program.
My set up is a K3 fully upgraded with the RJ45 serial port which connects
via the Elecraft custom cable to a P3.
Both connectors on the P3 are DB9, ie normal serial connectors.
As such, can I simply insert a further Y cable between one of the P3 serial
ports and the incoming cable from the K3 and then use the extra leg (with a
DB9 on the end) to connect to the SPE amplifier for CAT control ?
Or is that idea too simple ?
Any advice would be appreciated.
Thanks and 73
Barry VK2BJ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
