Do you have anything connected to the "Line In" jack on the K3S?
Doing so will disconnect the output of USB Audio CODEC and substitute
the Line In audio.
73,
... Joe, W4TV
On 2018-07-21 10:54 AM, Mike Dodd wrote:
On 7/21/2018 10:23 AM, Glenn Anderson wrote:
Make sure that you have the K3 sound card selected as the output sound
device in MMTTY.
Yes. I forgot to mention that. If I select the PC speakers as the output
device and hit TX in MMTTY, I can hear the FSK tones. But if I select
USB Audio Codec as the output device, the tones are not sent to the K3s.
I have done this repeatedly, with the same result -- no audio is
reaching the USB sound card to key the K3's VOX or modulate the
transmitter.
--- Mike
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
