What power supply are you using for the K3? Have you checked it. I was
using a Powerwerx and the fan had pretty much stopped working and with
FT8 it was getting quite hot after a while it would shut down the K3 and
I saw some other odd things. It took me a while to find the power
supply problem. Bought a new fan and everything is fine.
W0MU
On 7/24/2018 2:55 PM, MICHAEL SMITH wrote:
This condition has been seen on my K-3 when operating on 6 meters in FT8 mode.
The K-3 will run for about 45-60 minutes in continuous contact mode, then all
of a sudden will shutdown and only transmit 5 watts to the KPA500 amp. The
PA temp menu shows the amp at 35 degrees C. The FT8 mode uses 15 second
transmissions and cycles 4-5 times in 2 minutes. Normal PA temp is 25 degrees
C before transmitting.
Is anyone else having this issue with the K-3? Serial number of this K-3 is
5192.
Baldeagle535
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
