Mark,
While that might work, remember that the counterpoise(s) are a part of
the antenna, and not a "ground". It is better to use a BNC to binding
post adapter and connect the counterpoise to the black binding post - no
dependency on conductivity through the enclosure.
The BNC jack shells do not have a dependable low resistance path to the
GND post.
73,
Don W3FPR
On 7/27/2018 11:38 AM, Mark Petrovic wrote:
Hi. I suspect this is obvious to most readers, but to use a long wire
antenna with the K2 with the KAT2 option, one connects the antenna to the
ANT1 center conductor, and the counterpoises to the GND terminal?
Thanks.
Mark
AE6RT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
