Dick, Just to make sure I understand: are you using the K3 as an IF? If so, what band -- 10 meters?
It makes no sense that the K3 would have difficulty with out of band signals in the manner you describe. It has far better dynamic range on all bands, including 10 meters, than the TS-590. Wayne N6KR > On Jul 27, 2018, at 6:59 PM, Richard Beerman <[email protected]> wrote: > > Wonder if anyone else has encountered this on 2 Meters? I am using a 12 ele > K1FO yagi - about q12 dB gain on 2. That enters the shack where it is > connected to a Downeast Microwave 50 Watt transverter with about 17 dB gain > on receive. The output of the transverter is connected to transverter input > on my old K-3. For the longest time, I was receiving loud QRM from what I > initially thought were power line noise bursts. But, I became suspicious > because these bursts were about a second or so in duration consistently. > During this time, I was testing my setup for meteor scatter using the MSK 144 > software found in the current WSJT-X suite. These loud bursts created huge > red images on the monitor watching in 144.150 MHz, the MSK144 calling > frequency. > > I got suspicious that these signals were not simple electrical pole shorting > noise. So, I connected a whip to my old TS-790S rig and tuned it to 144.390 > MHz, the North American APRS frequency. WALAAAAA, the signals on my monitor > connected to a K-3 tuned to 144.150 MHz corresponded perfectly to the WPRS > signals on 144.390 MHz, some 240 kHz away! The preamp on the K-3 was off. > There were no other receiving preamps in line at the time. Later, I turned on > an external 2 Meter preamp and all that happened was that the APRS signals > were larger at 144.150 MHz. > > It appears that the front end of my K-3 simply folds up in the presence of > strong signals that are WAY off the receiving frequency. I can tell you that > connecting the same antenna/transverter to a Kenwood TS 590SG, there were no > traces of the APRS signals. And connecting the TS-790S to the K1FO likewise > produced no APRS QRM at 144.150. To me, with the presence of a number of > strong APRS signals on 144.390 makes this K-3 extremely unusable on 2 Meters. > I was running the K-3 noise blanker to handle the rest of the noise here but > likewise, I also had noise blankers running on the two Kenwood radios as > well. > > Any suggestions are welcome. Dick W5AK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
