The Elecraft transceivers control power differently than all other
amateur transceivers, so methods that work with others do not
necessarily work with Elecraft gear.
Set the audio level correctly first and you will have no problem. For
soundcard data modes (I don't care which one), set the audio so you have
4 bars solid on the ALC meter and the 5th bar flashing. That is the "NO
ALC" point. Set the power with the power knob.
See the article on my website www.w3fpr.com.
73,
Don W3FPR
On 7/28/2018 1:11 PM, [email protected] wrote:
I have run a TS-520 on PSK and MFSK. Diddeling with the mic gain does nothing.
I used the ALC out of the rig to control the power.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
