Do any of the other controls give unexpected results? My very old K3
[#642] developed that problem. For example, tapping ATU TUNE might
switch the AGC from slow to fast instead of initiating an ATU cycle. I
found:
1. Tapping or holding really hard [hard enough that I had to hold the
radio] would give the expected action.
2. The effect was more common on controls I rarely used and much less
common on those I used all the time.
The K3 went to the Elecraft hospital a month ago for some other repairs,
and they replaced some connector pins with the gold-plated variety. The
above described effect disappeared when the radio came home.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 7/30/2018 8:15 AM, Ken Roberson via Elecraft wrote:
Hello all
This must be menu item on the K3 that I have not found.
When I push the tune button the display will change from the RFout meter to ALC
On the other K3 when pushing the tune button the display dose not change.
I prefer that the display not change.
Thanks 73 Ken K5DNL
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
