SOLD
______________________
Clay Autery, KY5G
(318) 518-1389
On 01-Aug-18 10:53, Clay Autery wrote:
I am re-listing the following for, and with the authority of Carl
Beck, W5BEK:
*** Elecraft K3 Transceiver (Serial #5765) as specified below ***
PLUS: Adding the PowerWerx SS-30DV power supply to the deal!!
PLUS: 2 each UHF to UHF jumpers (Belden 8214 cable stock 11 AWG)) (K3
to amp and amp to tuner)
Here are the details on the radio:
+ K3/100 - K3 100W Transceiver Modular Kit
+ KAT3 - K3 ATU Modular Kit
+ KTCX03-1 - K3 TXCO 1ppm f/w correction to 0.5 ppm
+ KFL3A-2.8K - 2.8 kHz 8 pole roofing filter
+ KFL3A-2.1K - 2.1 kHz 8 pole roofing filter
+ KFL3A-1.0K - 1.0 kHz 8 pole roofing filter
+ KFL3A-400 - 400 Hz 8 pole roofing filter
+ KUSB - Universal Serial Bus Adapter (RS-232 to USB)
+ MH-2 Microphone for K3
+ K3 Power supply cable - This appears to be a heavier gauge wire than
the OE cable. Power Pole x formed/tinned terminal hooks.
++ KSYN3AUPG - KSYN3A Synthesizer Upgrade Kit for K3
++ KXV3B - RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface
upgrade. Adds 2nd preamp for 12,10,6 M
This radio was housed in the central air-conditioned portion of a
no-smoking home. It has never been taken to the field and is in
excellent, lightly used condition.
After completion of this "K" version assembly, the unit was
subsequently submitted to Elecraft for bench testing and was fully
evaluated and calibrated and found to have "met or exceeded all
published specs".
Between 12 July 2018 and the date of this "For Sale" post, the
following maintenance/checks were performed by Clay Autery, KY5G:
1) Upgraded to latest firmware: Version 5.64
2) Thorough internal and external cleaning/detail.
3) Checked for any "loose" fasteners; none found.
3) Full replacement of Main and Sub-RX AF and RF knobs with current
production design
4) Brand new LCD bezel
5) Calibrations performed:
a) Transmitter Gain: 5W and 50W (will do Milliwatt TX Gain
Calibration if needed/on request)
b) Reference Oscillator: per method #2, Zero-Beat @ 20 MHz. Dead
on; no adjustment required!!
c) Front Panel Temperature Sensor: set per manual procedure
d) PA Temperature Sensor: set per manual procedure
e) S-Meter and RF GAIN Control: set per manual procedure
6) Function check on all bands/SSB/AM/CW
This radio is ready to go!
High resolution photographs can be viewed here ---->
http://www.montac.com/images/k3_5765/
Original cost for this configuration: $3,355.45 Cost for closest
current configuration: $4,229.50
**** Price: $2,300.00 plus shipping and insurance.****
Payment via certified funds, check, PayPal. Personal check will be
held until clearing. PayPal is price PLUS PP fees. Will be shipped in
an Elecraft Factory box/packaging.
Inquiries may be made to me directly, off-list, or by phone.
73,
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
