Yes, and Yes, and when I do "M>V", look for memory channel 51, and then
"M>V" again, it all works as advertised. If I move to 30 meters, and
then come back, I have to do the above 3 step sequence to get back into
channel hopping. Manual says to cancel channel hopping by tapping RATE
or FINE, which works. But, if I change bands and then come back,
channel hopping is canceled even though I didn't tap RATE or FINE.
I don't believe this is a bug. What I was hoping for was to return to
channel hopping whenever I go to 5 MHz with the BAND button until I
cancel it like the manual says. I'm finding more CW Q's lately on the 5
MHz channels.
As I said, this is not worthy of a lot of effort, it would just be a
nice featurette.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 8/6/2018 6:54 PM, Don Wilhelm wrote:
Skip,
Are all the memories for the channel hopping in adjacent memory
locations? Do you have an "*" in the beginning of the text field?
My channel hopping frequencies for 60 meters have been set up for
years and have not changed, and as you can imagine, I have changed
bands many times since I set it up.
73,
Don W3FPR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
