Bill, Are you looking at the K2 MCU firmware or the KAT100 firmware? The KAT100 firmware currently is 1.05, and the 1.04 should work OK.
If you looked at the K2 firmware (hold any button while powering on and it will be briefly displayed), then the level to support the KAT100 must be 2.03d or above.
73, Don W3FPR On 8/7/2018 1:57 PM, Bill Coleman wrote:
Sadly, I have no old PIC chips for the KAT100 in my inventory. It came out of the box with the 1.04 firmware (which isn’t the latest, but I don’t have the K60XV, either.) I do have a second DB9 cable I can try, if I can find it.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
