Last night while using the K3s and WSJT-X on meteor Scatter in the MSK144 mode I was making numerous contacts. I stopped for awhile and returned, this time noticing I was not putting out any output from the amp.
The rig went into the transmit state, and the relay engaged on the amp. There was a small grid current on the amp as one gets with key down and no transmitted signal. When I eventually moved the power control on the K3s ever so slightly, it transmitted properly. I had to do this several times but did not notice it before. I re-loaded the factory settings with the Elecraft Utility and the issue remains albeit it is intermittent. Slightly moving the power knob resolves the issue. Any suggestions? 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com