Byron,
Yes, if you select anything other than the 2.7/2.8 filter for CW
transmit, you will receive an error.
73,
Don W3FPR
On 8/21/2018 4:48 PM, Byron Peebles wrote:
I would add that changing the TX FLT to something else generates an
error when I try to use it. 73, Byron
On 08/21/2018 04:33 PM, Don Wilhelm wrote:
Byron,
The K3/K3S is designed to use the filter that is installed "stock" in
all transceivers, so you need to select the 2.7 (or 2.8) filter for
CW (or any other mode except AM, FM or ESSB) for transmit.
Requiring a 1kHz filter for CW transmit would require that filter be
included in the basic package and would increase the price of the
transceiver.
This sounds like a 'curiosity' question - the K3/K3S works fine with
the 2.7/2.8kHz filter for CW transmit.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
