For SSB, I tricked my K3s out with a pair of matched 2.8s (needed for diversity reception) and a 2.1 that frankly doesn't make much of a difference. I also have the 13 kHz filter in for wideband RX and 10m FM (and if I ever wanted ESSB audio, which I don't). On the CW side, I have a matched pair of 400 Hz filters (again, for diversity reception), and a 250 -- and only because at the time I ordered, the 200 wasn't available.
I'm very pleased with that combination, and the only change I'd make if I had to do it again would be a 1.8 instead of a 2.1 for SSB. - pjd -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Lee Murrah via Elecraft Sent: Sunday, August 26, 2018 8:45 AM To: Elecraft Mail List Subject: [Elecraft] Filter Recommendations I am looking to upgrade my K3S with filters and am using the DX version of the radio as a guide. What is the advantage of the 2.8 KHz filter over the stock 2.7? What does the 2.1 KHz filter do for you? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
