Thanks for that infor, Eric. Won't bother with P-Touch for that. 73, Bill K9YEQ
https://wrj-tech.com/ -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Eric Rosenberg Sent: Thursday, August 30, 2018 8:39 PM To: elecraft@mailman net <[email protected]> Subject: Re: [Elecraft] K-POD labels Brother P-Touch labels fit between the K-POD function buttons. The best is TZ-211, 6 mm (1/4"). The next larger size, TZ-221, 9mm, (3/8") is just a hair too tight for me. Both are black print over a white background (which covers the F Key label on the K-POD. There are lots of choices of both background and type colors. Magnets did not work for me for two reasons. The narrowest magnetic tape is 1/2", which requires trimming. More of an issue is that the magnet isn't strong enough to stay in place in the K-POD. GL & 73, Eric W3DQ Washington, DC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
