Once you have selected your soundcard and get ready to set the audio
levels, you may want to refer to the article on my website
www.w3fpr.com. Scroll to the last article on the left column and click
the link.
You must set the KX3 (or K3 or K3S or KX2) for 4 bars solid on the ALC
display with the 5th bar flashing. Most internet advice does not work
for Elecraft radios.
73,
Don W3FPR
On 9/14/2018 10:54 AM, Walter Underwood wrote:
On Sep 14, 2018, at 6:08 AM, rick jones via Elecraft <[email protected]>
wrote:
I'm looking for a USB sound "dongle" that will interface with my KX3 for FT8
and similar modes. I have a SignalLink but I'm looking for a more portable solution. Can
someone recommend a current make/model that works well? Thank you.
This page evaluates a bunch of USB audio interfaces for spectrum display, a
similar problem.
http://www.telepostinc.com/soundcards.html
This page talks about experience with a few specific ones and how to set levels.
http://audiosystemsgroup.com/USB_Interfaces.pdf
wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
