I bet Mike would appreciate getting back to his issue, which has nothing to do with VOX...
Are you using a high end sound card/CODEC? If so it may just be that the internal CODEC - while quite good - is not up to snuff for this application. I'd also try using different USB cables, though that doesn't sound like it would be the problem. 73 jeff wk6i On Mon, Oct 1, 2018 at 8:49 AM, Mike Greenway <[email protected]> wrote: > I have used for years a K3 on EME with WSJT using Line In/Out audio. > Recently got a K3S and I am now using USB (CODEC) audio in and out of the > radio. In WSJT-10 they have Rate In/Rate Out monitors that should normally > run at 1.000. Using the K3 analog audio these always stayed right on 1.000 > but now that I am using the USB audio they are jumping around quite often > and getting out of range indicated in WSJT with a red marker. I have tried > two different computers and the same result. I tried changing the sample > rate in the computer audio settings but no change in the problem. I plan > to go back to analog Line In/Out on the K3S unless someone has an idea on > how to settle down the Rate In/Out fluctuations. I have not found anything > in the K3S that might affect this. You can reply off line if you like. 73 > Mike K4PI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > -- Jeff Stai ~ WK6I ~ [email protected] Twisted Oak Winery ~ http://www.twistedoak.com/ Facebook ~ http://www.facebook.com/twistedoak RTTY op at W7RN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
