Well the good news is that the K3S has nothing to do with my Rate In/Out
numbers jumping out of range. The reason I say that is I was watching
the WSJT-10 program with the K3S powered off and the were still jumping
out of range. When seeing that I decided to check the analog audio
again and couldnt believe it is jumping also. Something has gone off
the rails in the computer arena.
I disconnected everything from the machine today and found that anytime
I have the Ethernet cable to the computer from the Xfinity router/modem
connected the Rates start jumping randomly and sometimes out of range.
I changed the ethernet cable but not help. Just for drill I put some
torrids on each end with no change. I am thinking of seeing if
Xfinity will swap out the router/modem. The numbers do not necessarily
jump when there is traffic on the ethernet rx or tx so not sure how that
is causing the audio Rates to jump. I have no other clues right now
but guess this case can be closed on the Elecraft reflector as this has
nothing to do with the K3S. Thanks to all those that emailed me.. 73
Mike K4PI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
