Rick, You can do it that way, but be advised that a Y-BOX can also support remote power up of the amp. using a K3 macro, so no 12V supply or remotely controlled IP switch is needed.
See https://www.kkn.net/~n6tv/Y-BOX/Features.html#Remote . If you're driving the KPA1500 with a non-Elecraft transceiver, one that doesn't have a convenient 12V output, an RTS pin toggle on a serial port can also be used to power up the amp. See https://www.kkn.net/~n6tv/S-BOX/Features.html#RemoteHams (This shows a K3, but for non-Elecraft transceivers, the AUX cable would be connected to the KPA1500 instead of to the K3). 73, Bob, N6TV On Mon, Oct 1, 2018 at 3:35 PM Rick Stealey <[email protected]> wrote: > We think the solution is to provide 12 vdc into the rem connector from a > wall wart and are testing to see if the wart was controlled remotely via an > IP switch if it would solve the problem > > > Rick K2XT > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
