Mike,
If your noise source has changed, that is adequate reason the NB does
not work as it used to. With NB and NR there is no one solution that
fits all noise sources. You will just have to experiment a bit to see
which settings are most effective.
73,
Don W3FPR
On 10/8/2018 1:46 PM, Mike Greenway wrote:
I have 2 K3 and a K3S and for some time I have noticed all 3 doing something
that seems incorrect. All the radios are all up to correct Rev levels. For
years with my normal local noise, I always ran the NB at IF Nar 1-4 most all
the time with good success. In recent months, maybe more, on Nar only when I
get up to NAR 1-4 to 1-7 more noise than what I am trying to remove appears ie
with no NB and S4 with some minor local line noise, at NB Nar 1-7 the noise is
S6 or more. I don’t see that on any Med and Wide. I don’t see any difference
in what band I am on but on the higher bands I have PRE 1 on with AGC Fast or
Slow. Any input from others that might have seen this is appreciated. I know
in past years this did not occur and I have been lax in asking the question.
I actually checked at another QTH with only S2 on the meter and got the same
results.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
