Eddy,
How much less than 100 watts. You can figure there may be an up to 20%
error in the KXPA100 wattmeter reading - which will vary from band to
band. Are you seeing at least 80 watts? If so, it may be that all is well.
73,
Don W3FPR
On 10/11/2018 8:20 AM, Eddy Avila wrote:
I bought used the KXPA100 with ATU. The KXPA100 puts out less than full
power on 30 and 15 meters. The other bands the KXP!00 puts out 100 watts
and a bit more.
Both thte KX3 and the KXPA100 have the latest firmware installed.
This according to the LED's on the amp and connected to an MFJ dummyload. I
don't own an external wattmeter. I've run through calibration several times
and the overall results remain the same.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
