For the station bonding jumpers, #10 AWG auto primary wire with a ring
terminal attached is very adequate. Easy to work with, inexpensive,
does the job, and makes for a clean installation. Personally, I crimp
{mechanical connection} and solder {electrical connection} my ring
terminals on the jumpers.
73
Bob, K4TAX
On 10/12/2018 4:57 PM, Jim Brown wrote:
On 10/12/2018 2:32 PM, Edward R Cole wrote:
Probably using braid or multi-strand wire would make it easier.
Yes, but NEVER used braid exposed to moisture.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
