On the P3 on CW the signals seem always lower than on my Elecraft K3S (even 2 S-unit). This morning I tested the P3 S-meter with my HP8640 signal generator and I found that on every band the 50uV signal result in a perfect S9 on both K3S and P3. Now I think the real question is to introduce a correct averaging of the signal. I tried it but it doesnt solve. In the past I read here that the difference is caused by 1hz window of P3 when on K3 you have 200 or 500hz windows. It is not so, with a steady signal both units indicate S9 with 50uV. There is the problem for the commutated dits and dash of a CW signal? Is it possible to have a suggestion from mr. Burdick or other Elecraft tech about this question? Ian IK4EWX
-- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
