I have the same problem. I thought it was in the software I am using (HRD, FT8, JTAlerX). Perhaps not. I have to but in 100 watts from the K3S to get about 900 watts out.
> On October 16, 2018 at 10:35 PM Paul Baldock <[email protected] > mailto:[email protected] > wrote: > > > A friend of mine's KPA-1500 has just failed. It behaves like half the > PA has died, with max output power about 900W, and requiring > excessive drive to get that. He has calls in to service but no > response yet. Has anybody experienced such a failure? > > Thanks > * Paul KW7Y > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] mailto:[email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
