Hi Dave, When in standby mode the KPA1500 RF deck is bypassed by a relay and absolutely passes driver power from input to antenna without any amp keying required. If you think you are seeing something different, please contact [email protected] and they will help you figure it out.
73, Eric elecraft.com _..._ > On Oct 19, 2018, at 5:06 AM, David Decoons <[email protected]> wrote: > > I found my KPA1500 does not have RF passthrough in standby unless the radio > provides amp keying. Is this by design and any way to disable this “feature”? > > I use a program called DDUtil which limits power out per band to prevent > accidental overdrive of the amp. When DDUtil is in standby it disables the > radio’s amp keying line and sets radio to 100 watts automatically. > > Thanks > Dave wo2x > > > Sent from Mail for Windows 10 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
