I noticed CW stations were a bit off from the P3 and thought I needed to re-calibrate the P3 again. I did so and still encountered issues. I have the K3EXREF installed and it has been working fine for some time now with the GPSDO 10 MHz source.
On a hunch I looked at the K3 REF CAL results and the asterisk is not flashing. I rebooted the GPSDO and the K3 but no asterisk. I checked the cables and all are intact. I pressed the #2 button for XREF IN & no change, same if I tap it again for XREFOUT. It's either the GPSDO failed, the K3EXREF board has failed or something else. Any suggestions? 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
