I have a little pigtail with a PowerPole connector on it. Folds nicely out of the way.
On Sat, Oct 27, 2018 at 19:04 Don Wilhelm <[email protected]> wrote: > Ken, > > I don't know about mounting a mini-banana jack, but you could look at > the left end of the heatsink (heatsink facing you) for a good grounding > point other than the thumbscrews. > > Installing a mini-banana jack would involve drilling holes in the case. > There is not a lot of free space to do that. Pick your mounting > location carefully before drilling to be sure it will not interfere with > anything in the KX3. > > 73, > Don W3FPR > > On 10/27/2018 6:17 PM, Ken Ford - W9LSL wrote: > > One of the things I really like about the KX2 is the hole for a > mini-banana > > jack counterpoise connection. Is there any place that could be added on > a > > KX3? The case thumbscrews get cranky at times. > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > -- 72, Rich Hurd / WC3T / DMR: 3142737 Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
