Brian, The "+" in the USB/LSB indicates that ESSB mode is turned on. Turn it off and you will have compression back.
73, Don W3FPR On 11/24/2018 4:04 PM, Brian “VE3BWP” Pietrzyk wrote:
I’ve recently discovered that when I try to enable TX compression by tapping the CMP button I just get “N/A” in the VFO B display. The CMP icon does not show. I am able to toggle the S meter to CMP/ALC by tapping the MIC/KEY button no problem. I do see a + icon show on USB/LSB as i cycle through the modes I searched the reflector archive and the closest mention I find was changing from SSB + CW to - CW. I also made sure the spilt is off. No change. Compression used to work fine so it must be some settings conflict I’ve yet to discover. Help! Thanks, Brian ve3bwp KX3 s/n 09244 Firmware: Uc 2.90 Dsp 01.52 Pa 01.39 Thanks ve3bwp Sent from my iPhone ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
