Larry, not enough info to help out. If you have followed the manual and experienced this you have something very serious happening. You probably don’t have good load. If you have a dummy load, then connect output to it and try again. A call to tech support would be best bet in your case.
73, Bill K9YEQ -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Larry Sent: Wednesday, November 28, 2018 5:07 PM To: [email protected] Subject: [Elecraft] KPA1500 My KPA1500 faults on all bands and goes offline. The reset button quickly gets it back up only to fault again. The error message is: Fault: 12V supply 10.8 volts The line voltage is stable with a pair of #10’s going to the breaker box. Anybody got any ideas before I call support? Larry, WA9MAG Sent from Mail for Windows 10 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
