Hi Philip, You could set the power control (per band if you want) to 25 watts and the lock the power, mic gain, and compression. Go into the PWR SET menu and tap 1 to lock and unlock these.
73, Fred, KE7X For the newest KE7X book, "The Successful Ham Radio Operator's Handbook", focused for new hams and those returning to the hobby, see www.ke7x.com/successful<http://www.ke7x.com/successful> For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com> ________________________________ From: [email protected] <[email protected]> on behalf of pca via Elecraft <[email protected]> Sent: Friday, November 30, 2018 3:50 PM To: [email protected] Subject: [Elecraft] K3 power level question Is there a way to limit a K3 to, for example, 25 watts via it’s firmware. (Not an attenuator pad). I am familiar with the Tune function which works FB. I am referring to setting the max TX output to s designated value like 30 watts. Pls respond directly to me ([email protected]) or via the reflector if your reply is of general interest. Thanks, Philip KT3Y ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
