Marty, Have you tried unplugging the USB cable, then plugging it back in. Windows should recognize and activate the USB Audio CODEC. Also make sure "Show Hidden Devices" is checked.
73, Don W3FPR On 12/22/2018 4:14 PM, N1VH wrote:
My radio club just replaced our pc's and we are now running Win10 Pro. The K3S is recognized (com port and USB Controller) and works well with N1MM, HRD and WSJT-X (CAT control). However, the USB Audio Codec is not being loaded for the radio. Windows does not recognize the K3S sound card and as a result, WSJT-X does not have USB codec options in the audio settings. I have done a Windows reset / reload and downloaded the latest FTDI drivers. We had no issue running the K3S via USB under Win 10 basic on our old pc's. (K3S is configured correctly - Rs232 = 'USB' and Mic Set = 'line in'.) I know this was an issue earlier this year when MS pushed out a Win10 update. I have searched the forums, but have not seen any fixes other than what I have already tried. Does anyone have a suggestion as to how to get the USB Audio Codec to load in the Win 10 Pro 'device manager - sound, video and game controllers'? Thanks. Marty - N1VH -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
