Just made a quick sweep of my K3S in DATA A mode, no EQ, No SP, and find
that it will pass 70 Hz with little to no attenuation. On the high end
it will pass 3000 Hz but greatly attenuates 3100 Hz. This is done with
the stock filter of 2.7 kHz.
At this point in time, I don't have a suitable attenuator and cable to
make measurements from the MIC input.
73
Bob, K4TAX
On 12/25/2018 10:03 AM, Michael Blake via Elecraft wrote:
When using the stock K3s 2.7 KHz. roofing filter and all TX EQ settings are
zero (0) what is the normal TX audio rolloff below 300Hz.?
Michael Blake
[email protected] <mailto:[email protected]>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
