Eric,
The KPA500 (like all other Elecraft transceivers and amplifiers) uses
all electronic T-R switching which is very fast and there is no
"hot-switching"
The K2 Keyout to start of RF is fixed at about 12 ms. The QSK Delay
adjust the trailing hold time for the Keyout after keyup, not the start
delay. You can run with the KPA500 set to the default of 4ms.
73,
Don W3FPR
On 12/28/2018 4:32 AM, Eric Norris wrote:
I will be using my beloved K2 with my KPA500 this year for SKN. Many years
ago I put in an amp key line I think from the 160m board. In perusing the
K2 manual, I see the QSK delay is adjustable. What is a safe setting to
avoid hot keying?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
