Marcel,
About the maximum voltage, that might be in the TR7 specifications.
OTOH, start with the pot at a low voltage and increase it until you
achieve the results that you want.
The K3 EXT ALC default threshold is -4.0 volts, so that may be a good
starting point for your experiments.
73,
Don W3FPR
On 1/13/2019 5:19 PM, Marcel Jorba via Elecraft wrote:
Thanks to all of for your prompt answers
On CW it works great thanks to the carrier adjustment control
On SSB: it goes to 150W out very easy
Yes it is just for fun.
The K3 is great but the TR7 is funny and special.
One last question: Someone suggested to use a 9V battery with a pot to inject
a constant negative voltage in to the TR7. But any idea about the maximum
voltage?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
