On Sun, Jan 13, 2019 at 9:15 AM K9MA <[email protected]> wrote: > I've found that during some contest operation, it's handy to call CQ on > VFO B, while using VFO A to search and pounce. (Known as Single Operator > 2 VFO mode, SO2V.) That way, when unassisted, I can use the P3 to locate > promising signals. However, I sometimes wish the RIT would work with the > sub-receiver on VFO B. Has anyone found a way to do this? Even better > would be to have RIT on VFO B and XIT on VFO A. >
When running SO2V unassisted, I find it easiest to do the opposite: CQ on VFO A, and S&P on VFO B. Then you can have the RIT on A and watch the VFO B cursor track VFO B. Of course if you get too far away from your run frequency, you'll have to increase the P3 span so that you can still the VFO B cursor, but this is the best way around this problem for now, without resorting to extra hardware. Of course assisted operators can just send a spot to VFO B to have a listen. 73, Bob, N6TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
