See “Mains Voltage Setting” starting on page 5 of the manual. https://ftp.elecraft.com/KPA/Manuals%20Downloads/E740150%20KPA500%20Owners%20man%20Rev%20D4.pdf <https://ftp.elecraft.com/KPA/Manuals%20Downloads/E740150%20KPA500%20Owners%20man%20Rev%20D4.pdf>
wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Jan 15, 2019, at 5:43 PM, John Pierce <[email protected]> wrote: > > Just got 220v to my shack. I put the 220V fuses into the KPA500 and > connected the amp to 220v using the ELecraft power cable. I was expecting > to do something to the transformer wiring in the KPA500, but did not see any > instruction to do so. Is that all there is to powering the KPA500 from > 220vac? > > > > John > > AD2F > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
