Thanks Don. 

WAARC has been doing just that for about 8 or nine years. Works great. But some 
folks just want to make it hard. 

Sent from my iPhone
...nr4c. bill


> On Jan 16, 2019, at 12:38 AM, Don Wilhelm <[email protected]> wrote:
> 
> Last Field Day, my K3 was used at the CW station.  Two sets of headphones.  
> One for the operator and one for the logger.
> One was plugged into the rear panel Phones jack and the other was plugged 
> into the front panel jack.  No problem, no splitter.
> Ok, if there were folks nearby who wanted to listen in, we would simply turn 
> on SPKR+PHONES in the menu, and the speaker could also be heard.
> 
> Very versatile.  Why make it complicated - the K3 gives us the tools to do it 
> 'the easy way'.
> 
> 73,
> Don W3FPR
> 
>> On 1/15/2019 11:23 PM, K9MA wrote:
>> I found that the level at headphone output, at least the rear panel one, was 
>> too low to drive two pairs of headphones in parallel in my setup, which 
>> includes some isolation transformers. The speaker output works fine with the 
>> headphones. (Don't try this with super sensitive low impedance headphones.) 
>> I just wired a switch to an external speaker.
>> 73,
>> Scott K9MA
>>> On 1/15/2019 20:51, Nr4c wrote:
>>> Why use Line Out for speakers. There is a perfectly good jack marked 
>>> Speakers right next to the Phones jack. Be sure and use a Stereo plug but 
>>> it is for ........wait for it.  Speakers!
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

Reply via email to